QUANSHUN slurry valve is successfully applied on the tailing working conditions


QUANSHUN slurry valve is developed on the basis of PENTAIR Slurry valve . Firstly they are designed for the transportation of digestion workshop, decomposition workshop and settling workshop etc. The applicable medium is ore pulp and raw slurry that has characteristic of large flow resistance, high abrasiveness and easy scaling. Due to high performance under these serve working conditions, QUANSHUN slurry  valve has nice influence in alumina industry.





To develop other applications, QUANSHUN’s  R&D and sales team went into the work site of China Molybdenum Co.,ltd and found the other valves has short working life and frequent replacement problem in molybdenum ore conveying process.  According to the working condition, our R&D team optimized the performance on the original slurry valve, then developed the customized types of slurry valves.


China Molybdenum Co.,Ltd  was planning a major overhaul on the morning of June 14th.All the equipments was in shut down period . Tailing workshop  is composed of concentrated tank, diaphragm pump and water ring pump. As higher concentration (about 29%-43%)in the Molybdenum ,the medium  has a strong wear ability. so it has a higher  on the valve. QUANSHUN slurry valves were inspected one by one in this overhaul period .All the dimensions of valves were completely  meet the requirements and the installation was smoothly carried out .









The solid particles concentration is very high in the sand water slurry workshop, and the working condition is serve. For general valves ,they can only be used for 6 months under this condition. Because frequently replacement , the cost of maintenance people is increased . This condition is greatly improved after QUANSHUN Y type slurry valves being installed.

Manager of the China Molybdenum Co.,ltd also pay great attention to the valve replacement. Because replacement of the tank bottom valve is the most important process for them , our technical engineers carefully exchanged with their engineers and provide our flow control solutions to make sure everything going smoothly.

QUANSHUN VALVES COMPANY focused on every process to manufacturer valves for more than 10 years, and is professionally to provide solutions for hard working conditions for customer. We believe that QUANSHUN slurry valve will become the best choice of  more and more customer in severe condition !




 








评论

此博客中的热门博文

Y Type Slurry Valve